Gail Steel & Engineering LLP

A designation of "550 BHN" refers to steel plates with a Brinell Hardness Number (BHN) of approximately 550. The Brinell hardness test involves measuring the indentation hardness of a material by applying a known load to a hardened steel or carbide ball and measuring the diameter of the resulting indentation. A BHN of 550 indicates a very high level of hardness, suggesting exceptional resistance to abrasion and wear.

Key points about 550 BHN Plates:

1. Very High Hardness: A Brinell hardness of 550 is considered very high, indicating an exceptional resistance to penetration and wear. Such plates are well-suited for applications involving severe abrasive conditions.

2. Abrasion Resistance: Plates with a BHN of 550 are chosen for applications where extreme resistance to abrasion, impact, and sliding wear is essential. These applications often include heavy-duty mining, quarrying, and earthmoving equipment.

3. Strength and Toughness: While high hardness provides excellent abrasion resistance, it's crucial to consider the balance between hardness, strength, and toughness. In certain applications, materials with very high hardness may exhibit reduced toughness.

4. Weldability and Formability: The specific characteristics of the material, such as weldability and formability, will depend on the composition of the steel used to manufacture the plates. Very high-hardness materials may pose challenges during welding, and special precautions may be necessary.

5. Surface Treatment: Depending on the intended application, surface treatments or coatings may be applied to enhance the wear resistance or corrosion resistance of the plates.

Additional Information:

• Production Capacity: 20000

AR 400 is a type of abrasion-resistant steel that is well-known for its hardness and durability, designed to withstand abrasive wear and impact. Here are key features and applications associated with AR 400 plates:

Key Features:

1. Hardness: AR 400 plates exhibit high hardness, typically measured on the Brinell hardness scale (e.g., 400 HBW). This high hardness provides excellent resistance to abrasion and wear.

2. Abrasion Resistance: The steel is specifically engineered to resist abrasive wear, making it suitable for applications where materials are subjected to continuous rubbing, scraping, or sliding.

3. Impact Toughness: In addition to abrasion resistance, AR 400 plates offer good toughness, allowing them to withstand impacts and shocks without experiencing excessive damage.

4. Structural Integrity: AR 400 plates are designed to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

Applications:

1. Mining Equipment: AR 400 plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, AR 400 plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: AR 400 plates find application in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is crucial.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, AR 400 plates can be used for equipment like crushers, screens, and hoppers.

5. Steel Industry: Certain applications in the steel industry where wear-resistant materials are required for components in contact with abrasive materials.

Specifications:

• Material Grade: AR 400
• Hardness: Typically specified in Brinell hardness units (e.g., 400 HBW).
• Chemical Composition: Includes elements such as carbon, manganese, chromium, and other alloying elements contributing to its mechanical properties.

AR 450 is a type of abrasion-resistant steel known for its high hardness and toughness, designed to withstand abrasive wear in various applications. Here are some key features and applications associated with AR 450 plates:

Key Features:

1. Hardness: AR 450 plates exhibit high hardness, typically measured on the Brinell hardness scale (e.g., 450 HBW). This high hardness provides excellent resistance to abrasion and wear.

2. Abrasion Resistance: The steel is specifically engineered to resist abrasive wear, making it suitable for applications where materials are subjected to continuous rubbing, scraping, or sliding.

3. Impact Toughness: In addition to abrasion resistance, AR 450 plates offer good toughness, allowing them to withstand impacts and shocks without experiencing excessive damage.

4. Structural Integrity: AR 450 plates are designed to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

Applications:

1. Mining Equipment: AR 450 plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, AR 450 plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: AR 450 plates find application in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is crucial.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, AR 450 plates can be used for equipment like crushers, screens, and hoppers.

5. Steel Industry: Certain applications in the steel industry where wear-resistant materials are required for components in contact with abrasive materials.

Specifications:

• Material Grade: AR 450
• Hardness: Typically specified in Brinell hardness units (e.g., 450 HBW).
• Chemical Composition: Includes elements such as carbon, manganese, chromium, and other alloying elements contributing to its mechanical properties.

AR 500 plates refer to abrasion-resistant steel plates with a Brinell hardness rating of approximately 500. The "AR" stands for "Abrasion Resistant," and the number represents the Brinell hardness number (BHN), which is a measure of the material's resistance to wear and abrasion.

Key Features of AR 500 Plates:

1. High Hardness: AR 500 plates are characterized by a high Brinell hardness, indicating excellent resistance to abrasion and wear.

2. Wear Resistance: These plates are designed to withstand the impact and abrasion caused by abrasive materials, making them suitable for applications in harsh environments.

3. Applications: Commonly used in industries such as mining, construction, agriculture, and material handling where equipment is exposed to severe abrasive wear.

4. Structural Integrity: While providing high hardness and wear resistance, AR 500 plates are typically engineered to maintain good structural integrity, allowing them to be used in structural applications.

Typical Applications:

• Mining and Quarrying: Components in crushers, screens, and buckets.
• Construction and Earthmoving Equipment: Wear-resistant plates for excavator buckets, bulldozer blades, and other components.
• Material Handling: Chutes, liners, and hoppers in industries handling abrasive materials.
• Heavy Machinery: Structural components subjected to high wear and impact.

AR 550 plates refer to abrasion-resistant steel plates with a hardness level of approximately 550 Brinell Hardness Number (HBW). The "AR" in AR 550 stands for "Abrasion Resistant," indicating that these plates are specifically designed to withstand abrasive wear in challenging environments. The Brinell Hardness Number is a measure of the hardness of a material, and a higher value indicates greater resistance to indentation and wear.

Key Features of AR 550 Plates:

1. Abrasion Resistance: AR 550 plates are engineered to provide exceptional resistance to abrasion and wear. This makes them suitable for applications where materials are subjected to sliding, impact, or abrasive conditions.

2. High Hardness: The plates have a high Brinell hardness of around 550 HBW, contributing to their excellent resistance to wear and impact.

3. Toughness: While being resistant to wear, AR 550 plates are designed to maintain a certain level of toughness to withstand impact and deformation.

4. Applications: Commonly used in applications where materials are subjected to extreme wear, such as in mining, construction, material handling, and other heavy-duty industries.

Typical Applications:

• Mining and Quarrying: Components in crushers, screens, buckets, and other equipment subjected to abrasive wear.
• Construction and Earthmoving Equipment: Wear-resistant plates for excavator buckets, bulldozer blades, and other components.
• Material Handling: Chutes, liners, and hoppers in industries handling abrasive materials.

BRINAR 400 is a wear-resistant steel grade known for its hardness and toughness, designed to withstand abrasion and impact in various applications. Here are some key features and applications associated with BRINAR 400 plates:

Key Features:

1. Hardness: BRINAR 400 plates exhibit high hardness, typically measured on the Brinell hardness scale (e.g., 400 HBW). This hardness level provides good resistance against abrasion.

2. Abrasion Resistance: The steel is engineered to resist abrasive wear, making it suitable for applications where materials are subjected to continuous rubbing, scraping, or sliding.

3. Impact Toughness: In addition to abrasion resistance, BRINAR 400 plates offer good toughness, allowing them to withstand impacts and shocks without experiencing excessive damage.

4. Structural Integrity: These plates are designed to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

Applications:

1. Mining Equipment: BRINAR 400 plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, BRINAR 400 plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: BRINAR 400 plates find application in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is crucial.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, BRINAR 400 plates can be used for equipment like crushers, screens, and hoppers.

5. Steel Industry: Certain applications in the steel industry where wear-resistant materials are required for components in contact with abrasive materials.

Specifications:

• Material Grade: BRINAR 400
• Hardness: Typically specified in Brinell hardness units (e.g., 400 HBW).
• Chemical Composition: Includes elements such as carbon, manganese, chromium, and other alloying elements contributing to its mechanical properties.

BRINAR 450 is a wear-resistant steel grade known for its moderate hardness and toughness, designed to withstand abrasion and impact in various applications. Here are some key features and applications associated with BRINAR 450 plates:

Key Features:

1. Moderate Hardness: BRINAR 450 plates exhibit moderate hardness, typically measured on the Brinell hardness scale (e.g., 450 HBW). This hardness level provides good resistance against abrasion.

2. Abrasion Resistance: The steel is engineered to resist abrasive wear, making it suitable for applications where materials are subjected to continuous rubbing, scraping, or sliding.

3. Impact Toughness: In addition to abrasion resistance, BRINAR 450 plates offer good toughness, allowing them to withstand impacts and shocks without experiencing excessive damage.

4. Structural Integrity: These plates are designed to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

Applications:

1. Mining Equipment: BRINAR 450 plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, BRINAR 450 plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: BRINAR 450 plates find application in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is crucial.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, BRINAR 450 plates can be used for equipment like crushers, screens, and hoppers.

5. Steel Industry: Certain applications in the steel industry where wear-resistant materials are required for components in contact with abrasive materials.

Specifications:

• Material Grade: BRINAR 450
• Hardness: Typically specified in Brinell hardness units (e.g., 450 HBW).
• Chemical Composition: Includes elements such as carbon, manganese, chromium, and other alloying elements contributing to its mechanical properties.

BRINAR 500 is a wear-resistant steel grade known for its high hardness and toughness, designed to withstand abrasion and impact in demanding applications. Here are some key features and applications associated with BRINAR 500 plates:

Key Features:

1. High Hardness: BRINAR 500 plates exhibit high hardness, typically measured on the Brinell hardness scale (e.g., 500 HBW). This high hardness contributes to their resistance against abrasion.

2. Abrasion Resistance: The steel is specifically engineered to resist abrasive wear, making it suitable for applications where materials are subjected to continuous rubbing, scraping, or sliding.

3. Impact Toughness: In addition to abrasion resistance, BRINAR 500 plates often offer good toughness, allowing them to withstand impacts and shocks without experiencing excessive damage.

4. Structural Integrity: These plates are designed to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

Applications:

1. Mining Equipment: BRINAR 500 plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, BRINAR 500 plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: BRINAR 500 plates find application in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is crucial.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, BRINAR 500 plates can be used for equipment like crushers, screens, and hoppers.

5. Steel Industry: Certain applications in the steel industry where wear-resistant materials are required for components in contact with abrasive materials.

Specifications:

• Material Grade: BRINAR 500
• Hardness: Typically specified in Brinell hardness units (e.g., 500 HBW).
• Chemical Composition: Includes elements such as carbon, manganese, chromium, and other alloying elements contributing to its mechanical properties.

BRINAR 550 is a wear-resistant steel grade known for its high hardness and toughness, designed to withstand abrasion and impact in harsh environments. Here are some key features and applications associated with BRINAR 550 plates:

Key Features:

1. High Hardness: BRINAR 550 plates exhibit high hardness, typically measured on the Brinell hardness scale (e.g., 550 HBW). This high hardness contributes to their resistance against abrasion.

2. Abrasion Resistance: The steel is specifically designed to resist abrasive wear, making it suitable for applications where materials are subjected to continuous rubbing, scraping, or sliding.

3. Impact Toughness: In addition to abrasion resistance, BRINAR 550 plates often offer good toughness, allowing them to withstand impacts and shocks without experiencing excessive damage.

4. Structural Integrity: These plates are engineered to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

Applications:

1. Mining Equipment: BRINAR 550 plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, BRINAR 550 plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: BRINAR 550 plates find application in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is critical.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, BRINAR 550 plates can be used for equipment like crushers, screens, and hoppers.

5. Steel Industry: Certain applications in the steel industry where wear-resistant materials are required for components in contact with abrasive materials.

Specifications:

• Material Grade: BRINAR 550
• Hardness: Typically specified in Brinell hardness units (e.g., 550 HBW).
• Chemical Composition: Includes elements such as carbon, manganese, chromium, and other alloying elements contributing to its mechanical properties.

DILLIDUR 450V plates refer to abrasion-resistant steel plates with a Brinell hardness rating of approximately 450. DILLIDUR is a brand of wear-resistant steel produced by Dillinger, a well-known German steel manufacturer. The "450V" designation suggests a hardness level of 450 Brinell and the added "V" typically indicates a variant of the standard DILLIDUR 450 plates.

Key Features of DILLIDUR 450V Plates:

1. Abrasion Resistance: DILLIDUR 450V plates are designed to provide high resistance to abrasion, making them suitable for applications where materials are subjected to constant wear and impact.

2. Hardness: The Brinell hardness of 450 suggests a good balance between hardness and toughness, ensuring effective protection against abrasive wear.

3. Applications: Commonly used in industries such as mining, construction, material handling, and quarrying where equipment is exposed to abrasive materials.

4. Structural Integrity: While offering high hardness and wear resistance, DILLIDUR 450V plates are engineered to maintain structural integrity, allowing them to be used in both wear-resistant and structural applications.

Typical Applications:

• Mining and Quarrying: Components in crushers, screens, and buckets.
• Construction and Earthmoving Equipment: Wear-resistant plates for excavator buckets, bulldozer blades, and other components.
• Material Handling: Chutes, liners, and hoppers in industries handling abrasive materials.

DILLIDUR 550V plates refer to abrasion-resistant steel plates with a Brinell hardness rating of approximately 550. DILLIDUR is a brand of wear-resistant steel produced by Dillinger, a well-known German steel manufacturer. The "550V" designation indicates a higher hardness level compared to the DILLIDUR 450V plates, making it suitable for applications where extreme wear resistance is required.

Key Features of DILLIDUR 550V Plates:

1. High Abrasion Resistance: DILLIDUR 550V plates are specifically designed to provide exceptional resistance to abrasion, making them suitable for applications where materials are subjected to severe wear and impact.

2. Hardness: The Brinell hardness of 550 indicates a high level of hardness, ensuring effective protection against abrasive wear.

3. Applications: Commonly used in industries such as mining, construction, material handling, and quarrying where equipment is exposed to highly abrasive materials.

4. Structural Integrity: While offering high hardness and wear resistance, DILLIDUR 550V plates are engineered to maintain structural integrity, allowing them to be used in both wear-resistant and structural applications.

Typical Applications:

• Mining and Quarrying: Components in crushers, screens, and buckets.
• Construction and Earthmoving Equipment: Wear-resistant plates for excavator buckets, bulldozer blades, and other components.
• Material Handling: Chutes, liners, and hoppers in industries handling highly abrasive materials.

FORA 450 is an abrasion-resistant steel produced by Industeel, a subsidiary of ArcelorMittal. These plates are designed to offer excellent wear resistance in applications where materials are subjected to abrasive wear, impact, and sliding conditions. The "450" in FORA 450 indicates the approximate Brinell hardness number, suggesting a high level of hardness for resistance against wear.

Key Features of FORA 450 Plates:

1. Abrasion Resistance: FORA 450 plates are specifically engineered to withstand abrasive wear, making them suitable for applications in industries such as mining, construction, and material handling.

2. Moderate Hardness: The plates have a moderate Brinell hardness, typically around 450 HBW (Brinell Hardness Number), contributing to their wear resistance while maintaining a balance with toughness.

3. Toughness: While being resistant to wear, FORA 450 plates are designed to maintain a certain level of toughness, ensuring they can withstand impact and deformation.

4. Applications: Commonly used in applications where materials are subjected to sliding wear, impact, and abrasive conditions. This includes components in mining equipment, earthmoving machinery, and other heavy-duty applications.

Typical Applications:

• Mining and Quarrying: Components in crushers, screens, buckets, and other equipment subjected to abrasive wear.
• Construction and Earthmoving Equipment: Wear-resistant plates for excavator buckets, bulldozer blades, and other components.
• Material Handling: Chutes, liners, and hoppers in industries handling abrasive materials.

FORA 500 is an abrasion-resistant steel, and FORA 500 plates are specifically designed to provide excellent wear resistance in applications where materials are subjected to abrasive wear, impact, and sliding conditions. The "500" in FORA 500 refers to the approximate Brinell hardness number, indicating a high level of hardness for resistance against wear.

Key Features of FORA 500 Plates:

1. Abrasion Resistance: FORA 500 plates are engineered to withstand abrasive wear, making them suitable for applications in industries such as mining, construction, and material handling.

2. High Hardness: The plates have a high Brinell hardness, typically around 500 HBW (Brinell Hardness Number), contributing to their excellent resistance to wear and impact.

3. Toughness: While being resistant to wear, FORA 500 plates are designed to maintain a certain level of toughness, ensuring they can withstand impact and deformation.

4. Applications: Commonly used in applications where materials are subjected to sliding wear, impact, and abrasive conditions. This includes components in mining equipment, earthmoving machinery, and other heavy-duty applications.

Typical Applications:

• Mining and Quarrying: Components in crushers, screens, buckets, and other equipment subjected to abrasive wear.
• Construction and Earthmoving Equipment: Wear-resistant plates for excavator buckets, bulldozer blades, and other components.
• Material Handling: Chutes, liners, and hoppers in industries handling abrasive materials.

FORA 550 is a high-strength, abrasion-resistant steel plate produced by Industeel, a subsidiary of ArcelorMittal. These plates are designed to provide excellent wear resistance in demanding applications where abrasive materials are prevalent. The "550" in FORA 550 refers to the approximate Brinell hardness number, indicating a high level of hardness and resistance to abrasion.

Key Features of FORA 550 Plates:

1. Abrasion Resistance: FORA 550 plates are specifically engineered to withstand abrasive wear, making them suitable for applications in industries such as mining, construction, and material handling.

2. High Hardness: The plates have a high Brinell hardness, typically around 550 HBW (Brinell Hardness Number), which contributes to their excellent resistance to wear and impact.

3. Toughness: While being hard and wear-resistant, FORA 550 plates are designed to maintain a certain level of toughness, ensuring they can withstand impact and deformation.

4. Applications: Commonly used in applications where materials are subjected to sliding wear, impact, and abrasive conditions. This includes components in mining equipment, earthmoving machinery, and other heavy-duty applications.

Typical Applications:

• Mining and Quarrying: Components in crushers, screens, buckets, and other equipment subjected to abrasive wear.
• Construction and Earthmoving Equipment: Wear-resistant plates for excavator buckets, bulldozer blades, and other components.
• Material Handling: Chutes, liners, and hoppers in industries handling abrasive materials.

The term "HB 400 plates" refers to steel plates with a hardness of 400 on the Brinell hardness scale. The Brinell hardness test measures the resistance of a material to indentation, and a higher Brinell hardness number indicates a harder material. Here are some key points related to HB 400 plates:

Brinell Hardness (HB): 400 HB is indicative of a moderate level of hardness. It suggests that the steel has good resistance to abrasion and is suitable for applications where some level of wear resistance is needed.

Applications:

1. Wear-Resistant Components: HB 400 plates are often used in applications where resistance to wear and abrasion is important. They can be utilized in components subjected to sliding, impact, and abrasive wear.

2. Mining Equipment: Components such as buckets, liners, and screens in mining equipment that are exposed to abrasive materials.

3. Material Handling: Chutes, hoppers, and conveyor components in material handling systems where wear resistance is required.

4. Construction Machinery: Used in wear plates for construction equipment such as excavator buckets, bulldozer blades, and other components.

5. Quarrying: Plates used in equipment for crushing, screening, and processing materials in quarries.

Specifications:

• Hardness: 400 HB (Brinell Hardness)
• Chemical Composition: The specific chemical composition of the steel will depend on the grade or specification provided by the manufacturer or supplier.

HB 450 plates refer to high-strength, abrasion-resistant steel plates with a hardness level of approximately 450 HBW (Brinell Hardness). The "HB" stands for Brinell Hardness, which is a measure of the hardness of a material. A higher Brinell Hardness number indicates a harder material with better resistance to wear and abrasion.

Key Features of HB 450 Plates:

1. Abrasion Resistance: HB 450 plates are designed to withstand abrasive wear, making them suitable for applications in industries such as mining, construction, and material handling.

2. Moderate Hardness: The plates have a moderate Brinell Hardness of around 450 HBW, providing a balance between hardness and toughness.

3. Toughness: While being resistant to wear, these plates are engineered to maintain a certain level of toughness to withstand impact and deformation.

4. Applications: Commonly used in applications where materials are subjected to sliding wear, impact, and abrasive conditions. This includes components in mining equipment, earthmoving machinery, and other heavy-duty applications.

Typical Applications:

• Mining and Quarrying: Components in crushers, screens, buckets, and other equipment subjected to abrasive wear.
• Construction and Earthmoving Equipment: Wear-resistant plates for excavator buckets, bulldozer blades, and other components.
• Material Handling: Chutes, liners, and hoppers in industries handling abrasive materials.

HB 500 plates refer to high-strength, abrasion-resistant steel plates with a hardness level of approximately 500 HBW (Brinell Hardness). The "HB" stands for Brinell Hardness, which is a measure of the hardness of a material. A higher Brinell Hardness number indicates a harder material with better resistance to wear and abrasion.

Key Features of HB 500 Plates:

1. Abrasion Resistance: HB 500 plates are designed to withstand abrasive wear, making them suitable for applications in industries such as mining, construction, and material handling.

2. High Hardness: The plates have a high Brinell Hardness of around 500 HBW, providing excellent resistance to wear and impact.

3. Toughness: While being resistant to wear, these plates are engineered to maintain a certain level of toughness to withstand impact and deformation.

4. Applications: Commonly used in applications where materials are subjected to sliding wear, impact, and abrasive conditions. This includes components in mining equipment, earthmoving machinery, and other heavy-duty applications.

Typical Applications:

• Mining and Quarrying: Components in crushers, screens, buckets, and other equipment subjected to abrasive wear.
• Construction and Earthmoving Equipment: Wear-resistant plates for excavator buckets, bulldozer blades, and other components.
• Material Handling: Chutes, liners, and hoppers in industries handling abrasive materials.

Quard 400 is a brand of abrasion-resistant steel plates manufactured by NLMK Clabecq. These plates are designed to offer excellent resistance to abrasive wear in challenging environments. Quard 400 plates are part of the Quard series, where the number represents the nominal hardness in Brinell hardness units (HBW). In the case of Quard 400, it indicates a nominal hardness of 400 HBW. Here are some key features and applications associated with Quard 400 plates:

Key Features:

1. Abrasion Resistance: Quard 400 plates are specifically engineered to withstand abrasive wear, making them suitable for applications where materials are subjected to constant rubbing, scraping, or sliding.

2. Toughness: In addition to abrasion resistance, these plates often possess good toughness, allowing them to withstand impacts and shocks without experiencing excessive damage.

3. Structural Integrity: Quard 400 plates are designed to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

4. Weldability: Depending on the specific grade and series, Quard plates may offer good weldability, allowing for ease of fabrication and repair.

Applications:

1. Mining Equipment: Quard 400 plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, these plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: Quard 400 plates are suitable for use in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is critical.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, these plates can be used for equipment like crushers, screens, and hoppers.

5. Forestry Equipment: Applications in the forestry industry where machinery is exposed to abrasive materials, such as wood, rocks, and soil.

Specifications:

• Material Grade: Quard 400
• Hardness: The nominal hardness of 400 HBW indicates the hardness level of the plates.

Quard 450 is a brand of abrasion-resistant steel plates manufactured by NLMK Clabecq. These plates are designed to provide excellent resistance to abrasive wear in challenging environments. Quard 450 plates are part of the Quard series, where the number represents the nominal hardness in Brinell hardness units (HBW). In the case of Quard 450, it indicates a nominal hardness of 450 HBW. Here are some key features and applications associated with Quard 450 plates:

Key Features:

1. High Abrasion Resistance: Quard 450 plates are specifically engineered to withstand abrasive wear, making them suitable for applications where materials are subjected to constant rubbing, scraping, or sliding.

2. High Toughness: In addition to abrasion resistance, these plates often possess high toughness, allowing them to withstand sudden impacts and shocks without experiencing excessive damage.

3. Structural Integrity: Quard 450 plates are designed to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

4. Weldability: Depending on the specific grade and series, Quard plates may offer good weldability, allowing for ease of fabrication and repair.

Applications:

1. Mining Equipment: Quard 450 plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, these plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: Quard 450 plates are suitable for use in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is critical.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, these plates can be used for equipment like crushers, screens, and hoppers.

5. Forestry Equipment: Applications in the forestry industry where machinery is exposed to abrasive materials, such as wood, rocks, and soil.

Specifications:

• Material Grade: Quard 450
• Hardness: The nominal hardness of 450 HBW indicates the hardness level of the plates.

Quard 500 is a brand of abrasion-resistant steel plates manufactured by NLMK Clabecq. These plates are designed to provide excellent resistance to abrasive wear in harsh environments. Quard 500 plates are part of the Quard series, where the number represents the nominal hardness in Brinell hardness units (HBW). In the case of Quard 500, it indicates a nominal hardness of 500 HBW. Here are some key features and applications associated with Quard 500 plates:

Key Features:

1. High Abrasion Resistance: Quard 500 plates are specifically engineered to withstand abrasive wear, making them suitable for applications where materials are subjected to constant rubbing, scraping, or sliding.

2. High Toughness: In addition to abrasion resistance, these plates often possess high toughness, allowing them to withstand sudden impacts and shocks without experiencing excessive damage.

3. Structural Integrity: Quard 500 plates are designed to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

4. Weldability: Depending on the specific grade and series, Quard plates may offer good weldability, allowing for ease of fabrication and repair.

Applications:

1. Mining Equipment: Quard 500 plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, these plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: Quard 500 plates are suitable for use in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is critical.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, these plates can be used for equipment like crushers, screens, and hoppers.

5. Forestry Equipment: Applications in the forestry industry where machinery is exposed to abrasive materials, such as wood, rocks, and soil.

Specifications:

• Material Grade: Quard 500
• Hardness: The nominal hardness of 500 HBW indicates the hardness level of the plates.

400 BHN (Brinell Hardness Number) plates refer to wear-resistant steel plates with a Brinell hardness rating of 400. The Brinell hardness test measures the hardness of a material by indenting a hardened steel or carbide ball into the surface of the material and measuring the diameter of the impression. The higher the Brinell hardness number, the harder the material.

Key Features of 400 BHN Plates:

1. High Hardness: These plates are characterized by high hardness, making them suitable for applications where resistance to abrasion, wear, and impact is crucial.

2. Wear Resistance: The high Brinell hardness indicates excellent wear resistance, making these plates ideal for use in environments with abrasive materials.

3. Applications: Commonly used in industries such as mining, construction, agriculture, and material handling where equipment is exposed to abrasive wear.

4. Machinability: Depending on the specific alloy composition and heat treatment, the machinability of 400 BHN plates can vary.

Typical Applications:

• Mining and Quarrying: Components in crushers, screens, and buckets.
• Construction and Earthmoving Equipment: Wear-resistant plates for excavator buckets, bulldozer blades, and other components.
• Material Handling: Chutes, liners, and hoppers in industries handling abrasive materials.

"500 BHN" refers to steel plates with a Brinell Hardness Number (BHN) of approximately 500. The Brinell hardness test measures the hardness of a material by indenting it with a hardened steel or carbide ball under a known load. A BHN of 500 suggests a high level of hardness, indicating resistance to abrasion and wear.

Key points about 500 BHN Plates:

1. High Hardness: A Brinell hardness of 500 is considered high, indicating excellent resistance to penetration and wear. These plates are suitable for applications where severe abrasion and wear are anticipated.

2. Abrasion Resistance: Plates with a BHN of 500 are chosen for applications involving extreme abrasion, impact, and sliding wear. Common applications include mining, earthmoving equipment, and components exposed to harsh operating conditions.

3. Strength and Toughness: While high hardness contributes to excellent abrasion resistance, the material is typically designed to maintain a balance between hardness, strength, and toughness to withstand various loading conditions.

4. Weldability: Materials with high hardness may pose challenges during welding, and special precautions may be necessary to avoid issues like cracking. The specific weldability will depend on the composition of the steel used in the plates.

5. Formability: The level of formability may be reduced compared to lower hardness steels, but these plates are still generally suitable for forming processes to meet specific design requirements.

6. Applications: 500 BHN plates find applications in industries where extreme wear resistance is crucial. This includes the manufacturing of wear-resistant components such as liners, buckets, and blades.

7. Surface Treatment: Depending on the intended application, surface treatments or coatings may be applied to further enhance the wear resistance or corrosion resistance of the plates.

"Rockstar 550" likely refers to a high-strength abrasion-resistant steel plate with a Brinell Hardness Number (BHN) of approximately 550. The "Rockstar" brand is often used by manufacturers to designate their high-performance abrasion-resistant steel plates. These plates are specifically designed to withstand severe wear and abrasion in demanding applications.

Key features of Rockstar 550 Plates:

1. High Abrasion Resistance: Rockstar 550 plates are known for their exceptional resistance to abrasion, making them suitable for applications where the material is subjected to severe wear and impact.

2. Brinell Hardness: The "550" in Rockstar 550 indicates the approximate Brinell hardness of the material. A BHN of 550 suggests a very high level of hardness, contributing to the plates' ability to resist penetration and wear.

3. Applications: These plates are commonly used in industries such as mining, construction, earthmoving, and material handling, where equipment is exposed to abrasive conditions. Examples of applications include buckets, dump trucks, chutes, and crushers.

4. Strength and Toughness: While high hardness is essential for abrasion resistance, the material is typically designed to maintain a balance between hardness, strength, and toughness to withstand various loading conditions.

5. Weldability: Rockstar plates are generally designed to be weldable using standard welding methods. However, as with any high-strength steel, proper welding procedures should be followed to maintain the integrity of the welded joints.

6. Formability: The level of formability may vary, but these plates are typically suitable for forming processes to meet specific design requirements.

"Rockhard 500" likely refers to a specific brand or grade of high-strength abrasion-resistant steel plates with a Brinell Hardness Number (BHN) of approximately 500. This type of steel is designed to withstand severe wear and abrasion in challenging environments.

Key features of Rockhard 500 Plates:

1. High Abrasion Resistance: Rockhard 500 plates are known for their exceptional resistance to abrasion, making them suitable for applications where the material is exposed to severe wear, impact, and sliding.

2. Brinell Hardness: The "500" in Rockhard 500 indicates the approximate Brinell hardness of the material. A BHN of 500 signifies a high level of hardness, contributing to the plates' ability to resist penetration and wear.

3. Applications: These plates are commonly used in industries such as mining, construction, earthmoving, and material handling, where equipment is subjected to abrasive conditions. Applications include buckets, dump trucks, chutes, crushers, and other components prone to wear.

4. Strength and Toughness: While high hardness is crucial for abrasion resistance, the material is typically designed to maintain a balance between hardness, strength, and toughness to withstand various loading conditions.

5. Weldability: Rockhard 500 plates are generally designed to be weldable using standard welding methods. However, as with any high-strength steel, proper welding procedures should be followed to maintain the integrity of the welded joints.

6. Formability: The level of formability may vary, but these plates are typically suitable for forming processes to meet specific design requirements.

"Rockhard 450" likely refers to a specific brand or grade of high-strength abrasion-resistant steel plates with a Brinell Hardness Number (BHN) of approximately 450. This type of steel is specifically designed to withstand wear and abrasion in demanding applications.

Key features of Rockhard 450 Plates:

1. Abrasion Resistance: Rockhard 450 plates are known for their resistance to abrasion, making them suitable for applications where the material is subjected to wear, impact, and sliding.

2. Brinell Hardness: The "450" in Rockhard 450 indicates the approximate Brinell hardness of the material. A BHN of 450 signifies a high level of hardness, contributing to the plates' ability to resist penetration and wear.

3. Applications: These plates are commonly used in industries such as mining, construction, earthmoving, and material handling, where equipment is exposed to abrasive conditions. Applications include buckets, dump trucks, chutes, crushers, and other components prone to wear.

4. Strength and Toughness: While high hardness is crucial for abrasion resistance, the material is typically designed to maintain a balance between hardness, strength, and toughness to withstand various loading conditions.

5. Weldability: Rockhard 450 plates are generally designed to be weldable using standard welding methods. However, as with any high-strength steel, proper welding procedures should be followed to maintain the integrity of the welded joints.

6. Formability: The level of formability may vary, but these plates are typically suitable for forming processes to meet specific design requirements.

"Rockstar 450" likely refers to a specific brand or grade of high-strength abrasion-resistant steel plates with a Brinell Hardness Number (BHN) of approximately 450. These plates are designed to withstand wear and abrasion in demanding applications.

Key features of Rockstar 450 Plates:

1. Abrasion Resistance: Rockstar 450 plates are known for their resistance to abrasion, making them suitable for applications where the material is subjected to wear, impact, and sliding.

2. Brinell Hardness: The "450" in Rockstar 450 indicates the approximate Brinell hardness of the material. A BHN of 450 signifies a high level of hardness, contributing to the plates' ability to resist penetration and wear.

3. Applications: These plates are commonly used in industries such as mining, construction, earthmoving, and material handling, where equipment is exposed to abrasive conditions. Applications include buckets, dump trucks, chutes, crushers, and other components prone to wear.

4. Strength and Toughness: While high hardness is crucial for abrasion resistance, the material is typically designed to maintain a balance between hardness, strength, and toughness to withstand various loading conditions.

5. Weldability: Rockstar 450 plates are generally designed to be weldable using standard welding methods. However, as with any high-strength steel, proper welding procedures should be followed to maintain the integrity of the welded joints.

6. Formability: The level of formability may vary, but these plates are typically suitable for forming processes to meet specific design requirements.

"Rockstar 400" likely refers to a specific brand or grade of high-strength abrasion-resistant steel plates with a Brinell Hardness Number (BHN) of approximately 400. These plates are designed to provide resistance to wear and abrasion in demanding applications.

Key features of Rockstar 400 Plates:

1. Abrasion Resistance: Rockstar 400 plates are known for their resistance to abrasion, making them suitable for applications where the material is subjected to wear, impact, and sliding.

2. Brinell Hardness: The "400" in Rockstar 400 indicates the approximate Brinell hardness of the material. A BHN of 400 signifies a high level of hardness, contributing to the plates' ability to resist penetration and wear.

3. Applications: These plates are commonly used in industries such as mining, construction, earthmoving, and material handling, where equipment is exposed to abrasive conditions. Applications include buckets, dump trucks, chutes, crushers, and other components prone to wear.

4. Strength and Toughness: While high hardness is crucial for abrasion resistance, the material is typically designed to maintain a balance between hardness, strength, and toughness to withstand various loading conditions.

5. Weldability: Rockstar 400 plates are generally designed to be weldable using standard welding methods. However, as with any high-strength steel, proper welding procedures should be followed to maintain the integrity of the welded joints.

6. Formability: The level of formability may vary, but these plates are typically suitable for forming processes to meet specific design requirements.

Quard 550 is a brand of abrasion-resistant steel plates manufactured by NLMK Clabecq. These plates are designed to provide excellent resistance to abrasive wear in harsh environments. Quard 550 plates are part of the Quard series, where the number represents the nominal hardness in Brinell hardness units (HBW). In the case of Quard 550, it indicates a nominal hardness of 550 HBW. Here are some key features and applications associated with Quard 550 plates:

Key Features:

1. High Abrasion Resistance: Quard 550 plates are specifically engineered to withstand abrasive wear, making them suitable for applications where materials are subjected to constant rubbing, scraping, or sliding.

2. High Toughness: In addition to abrasion resistance, these plates often possess high toughness, allowing them to withstand sudden impacts and shocks without experiencing excessive damage.

3. Structural Integrity: Quard 550 plates are designed to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

4. Weldability: Depending on the specific grade and series, Quard plates may offer good weldability, allowing for ease of fabrication and repair.

Applications:

1. Mining Equipment: Quard 550 plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, these plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: Quard 550 plates are suitable for use in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is critical.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, these plates can be used for equipment like crushers, screens, and hoppers.

5. Forestry Equipment: Applications in the forestry industry where machinery is exposed to abrasive materials, such as wood, rocks, and soil.

Specifications:

• Material Grade: Quard 550
• Hardness: The nominal hardness of 550 HBW indicates the hardness level of the plates.

A designation of "450 BHN" refers to steel plates with a Brinell Hardness Number (BHN) of approximately 450. The Brinell hardness test involves measuring the indentation hardness of a material by applying a known load to a hardened steel or carbide ball and measuring the diameter of the resulting indentation. A BHN of 450 indicates a high level of hardness, suggesting good resistance to abrasion and wear.

Key points about 450 BHN Plates:

1. High Hardness: A Brinell hardness of 450 is considered high, indicating that the material is resistant to penetration and wear. It makes these plates suitable for applications involving abrasive conditions.

2. Abrasion Resistance: Plates with a BHN of 450 are often chosen for applications where resistance to abrasion, impact, and sliding wear is crucial. Common applications include mining, quarrying, construction, and material handling equipment.

3. Strength and Toughness: While high hardness provides excellent abrasion resistance, it's important to consider the balance between hardness, strength, and toughness. In certain applications, materials with high hardness may sacrifice some toughness.

4. Weldability and Formability: The specific characteristics of the material, such as weldability and formability, will depend on the composition of the steel used to manufacture the plates. High-hardness materials may require careful consideration during welding to avoid issues like cracking.

5. Surface Treatment: Depending on the intended application, surface treatments or coatings may be applied to enhance the wear resistance or corrosion resistance of the plates.

"Rockhard 400" likely refers to a specific brand or grade of high-strength abrasion-resistant steel plates with a Brinell Hardness Number (BHN) of approximately 400. These plates are designed to withstand wear and abrasion in demanding applications.

Key features of Rockhard 400 Plates:

1. Abrasion Resistance: Rockhard 400 plates are known for their resistance to abrasion, making them suitable for applications where the material is subjected to wear, impact, and sliding.

2. Brinell Hardness: The "400" in Rockhard 400 indicates the approximate Brinell hardness of the material. A BHN of 400 signifies a high level of hardness, contributing to the plates' ability to resist penetration and wear.

3. Applications: These plates are commonly used in industries such as mining, construction, earthmoving, and material handling, where equipment is exposed to abrasive conditions. Applications include buckets, dump trucks, chutes, crushers, and other components prone to wear.

4. Strength and Toughness: While high hardness is crucial for abrasion resistance, the material is typically designed to maintain a balance between hardness, strength, and toughness to withstand various loading conditions.

5. Weldability: Rockhard 400 plates are generally designed to be weldable using standard welding methods. However, as with any high-strength steel, proper welding procedures should be followed to maintain the integrity of the welded joints.

6. Formability: The level of formability may vary, but these plates are typically suitable for forming processes to meet specific design requirements.

"Rockstar 500" likely refers to a specific brand or grade of high-strength abrasion-resistant steel plates with a Brinell Hardness Number (BHN) of approximately 500. This type of steel is designed to provide exceptional resistance to wear and abrasion in demanding applications.

Key features of Rockstar 500 Plates:

1. High Abrasion Resistance: Rockstar 500 plates are known for their exceptional resistance to abrasion, making them suitable for applications where the material is exposed to severe wear, impact, and sliding.

2. Brinell Hardness: The "500" in Rockstar 500 indicates the approximate Brinell hardness of the material. A BHN of 500 signifies a high level of hardness, contributing to the plates' ability to resist penetration and wear.

3. Applications: These plates are commonly used in industries such as mining, construction, earthmoving, and material handling, where equipment is subjected to abrasive conditions. Applications include buckets, dump trucks, chutes, crushers, and other components prone to wear.

4. Strength and Toughness: While high hardness is crucial for abrasion resistance, the material is typically designed to maintain a balance between hardness, strength, and toughness to withstand various loading conditions.

5. Weldability: Rockstar 500 plates are generally designed to be weldable using standard welding methods. However, as with any high-strength steel, proper welding procedures should be followed to maintain the integrity of the welded joints.

6. Formability: The level of formability may vary, but these plates are typically suitable for forming processes to meet specific design requirements.

"Rockstar Plates" typically refers to a specific brand or type of wear-resistant steel plates used in applications where resistance to abrasion and impact is crucial. These plates are designed to withstand the abrasive wear and impact encountered in industries such as mining, construction, and material handling. While there may be different variations or series of Rockstar Plates, the term is commonly associated with high-strength, wear-resistant steel manufactured by certain steel producers. Here are some general features and applications associated with wear-resistant Rockstar Plates:

Key Features:

1. High Abrasion Resistance: Rockstar Plates are specifically engineered to provide exceptional resistance to abrasive wear, making them suitable for applications where materials are subjected to constant rubbing, scraping, or sliding.

2. High Impact Toughness: In addition to abrasion resistance, these plates often possess high impact toughness, allowing them to withstand sudden impacts and shocks without experiencing excessive damage.

3. Structural Integrity: Rockstar Plates are designed to maintain their structural integrity under harsh conditions, ensuring a longer service life and reducing the need for frequent replacements.

4. Weldability: Depending on the specific grade and series, Rockstar Plates may offer good weldability, allowing for ease of fabrication and repair.

Applications:

1. Mining Equipment: Rockstar Plates are commonly used in the mining industry for the fabrication of components exposed to abrasive materials, such as ore and rocks. This includes truck beds, buckets, and crusher components.

2. Construction Machinery: In construction and earthmoving equipment, these plates can be used for parts like excavator buckets, bulldozer blades, and other wear-prone components.

3. Material Handling: Rockstar Plates are suitable for use in material handling equipment like conveyors, chutes, and hoppers where abrasion resistance is critical.

4. Quarries and Cement Plants: In environments where abrasive materials are processed, such as quarries and cement plants, these plates can be used for equipment like crushers, screens, and hoppers.

5. Forestry Equipment: Applications in the forestry industry where machinery is exposed to abrasive materials, such as wood, rocks, and soil.

Series and Grades:

Rockstar Plates are often available in different series or grades, each designed for specific applications and wear conditions. Common series may include Rockstar 400, Rockstar 450, Rockstar 500, etc., with the number representing the nominal hardness in Brinell hardness units.

AR400, also known at Ford Steel as Wearalloy 400, is a high-carbon steel with a nominal hardness of 400 and a minimum hardness on the Brinell scale of 360 to 440. Abrasion resistant steel is created by quenching and tempering forged steel plates

FORA 400 is a brand name for a high-strength and abrasion-resistant quenched and tempered steel. It is designed to offer excellent wear resistance and impact toughness, making it suitable for applications in industries such as mining, construction, and material handling where abrasive wear is a significant factor. FORA 400 plates are typically used in the construction of equipment exposed to harsh wear conditions.

Key Properties of FORA 400:

1. High Hardness: FORA 400 plates are hardened through a quenching and tempering process, resulting in high hardness levels that contribute to superior wear resistance.

2. Abrasion Resistance: The material is specifically designed to resist abrasion and wear caused by contact with abrasive materials like rocks, minerals, and other challenging substances.

3. Impact Toughness: While providing excellent abrasion resistance, FORA 400 also offers good impact toughness, ensuring the material can withstand sudden shocks and impacts.

4. Weldability: Depending on the specific composition and heat treatment, FORA 400 may have good weldability, allowing for the fabrication of components and structures.

5. Applications: FORA 400 plates are commonly used in the manufacturing of wear-resistant components such as buckets, dump trucks, chutes, and other equipment subjected to abrasive wear and impact.

Typical Applications of FORA 400 Plates:

1. Mining Equipment: FORA 400 is often used for the construction of mining equipment, including excavator buckets, truck bodies, and wear liners.

2. Construction Machinery: Components in construction machinery, such as buckets and earthmoving equipment, benefit from the wear resistance of FORA 400.

3. Material Handling: Equipment used in material handling, such as conveyor systems and chutes, can utilize FORA 400 plates for increased durability.

4. Quarry and Aggregate Processing: Crushers, screens, and other equipment involved in quarry and aggregate processing can benefit from the abrasion resistance of FORA 400.

The term "HB 550 plates" refers to steel plates with a hardness of 550 on the Brinell hardness scale. The Brinell hardness test measures the hardness of a material by indenting it with a spherical indenter and then measuring the diameter of the indentation. A higher Brinell hardness number indicates a harder material.

Here are some key points related to HB 550 plates:

Brinell Hardness (HB): 550 HB is a relatively high level of hardness, suggesting that the steel is resistant to deformation and wear. It makes HB 550 plates suitable for applications where hardness and abrasion resistance are important.

Applications:

1. Abrasion-Resistant Components: HB 550 plates are commonly used in applications where resistance to wear, abrasion, and impact is crucial. This includes components in industries such as mining, construction, and material handling.

2. Mining Equipment: Components like buckets, liners, and screens in mining equipment that are subjected to abrasive materials.

3. Material Handling: Chutes, hoppers, and conveyor components in material handling systems.

4. Construction Machinery: Wear plates in construction equipment such as excavator buckets and bulldozer blades.

Specifications:

• Hardness: 550 HB (Brinell Hardness)
• Chemical Composition: The specific chemical composition of the steel will depend on the grade or specification provided by the manufacturer or supplier.

We are engaged in offering a wide range of  Abrex Plate 450 to our clients. Our range of all products is widely appreciated by our clients.